Infrared heaters comfort, comfortSoft, comfortPlus

The use of the highest quality materials ensures very high efficiency and unrivalled durability. As classic infrared heaters, the comfort, comfortSoft and comfortPlus infrared heaters can be adapted to all interior designs thanks to the variety and large selection of sizes. The comfort infrared heaters are considered the classic heating systems from easyTherm®. They are suitable for a variety of different applications as room heaters. The comfortSoft series was developed for particularly gentle heat and is especially suitable for applications in the hand area. With a maximum surface temperature of 85 °C, our comfortSoft models are used especially in kindergartens, schools or other areas where gentler heat is desired. Wherever maximum heat output with high safety and reliability is required, our comfortPlus models are used. In addition to space heating, these are mostly used for drying buildings in the private, commercial or industrial sector.

Advantages of the infrared heating comfort

  • Easy mounting on the wall or ceiling
  • Highest efficiency according to IEC 60675-3
  • Austrian quality
  • Healthy, comfortable heat
  • Can be combined with LED light frames
  • Elegant, simple design
  • The perfect solution for any room size
  • 10 years full warranty

Efficiency and safety

All comfort infrared panels from easyTherm® are 100% developed and manufactured in Austria.

Not only are high-end materials used, but special attention can also be paid to safety: Every single heater is manufactured and tested for you according to the valid safety guidelines. This results not only in a unique heating efficiency of the heating panels, but also in an incomparable durability.


Infrared heaters for wall and ceiling mounting

The infrared heating comfort is available in 3 power levels. Depending on the application, you can always choose the right heater:

 

comfort - the classic heating

Our classic infrared panels are suitable for both ceiling and wall mounting. Through clever product innovation, we have succeeded in increasing the performance of our most popular infrared heaters of the comfort series by a sensational 35%. With a surface temperature of up to 95 °C, the panels of the comfort series are suitable as classic heating for the living area.

comfortSoft- Gentle warmth

The maximum surface temperature of 85 °C makes the infrared panels of the comfortSoft series the perfect heater for rooms where a gentler heat is desired. This series is especially suitable for new buildings and in rooms where particularly comfortable heat is desired, e.g. children's rooms.

comfortPlus- Highest heating capacity

The high heating output of the comfortPlus series is particularly suitable where a very high heating output is needed: in poorly insulated buildings or rooms with high ceilings. It is also popular for heating workplaces in commercial and industrial rooms and for drying walls after flooding or water damage. Due to its performance, the comfortPlus series should be installed in an area that cannot be touched.

High-quality infrared heating for every application

With the many combinations of frames and finishes, we create your customised heating system - suitable for every room - entirely according to your wishes. You can choose from a variety of different sizes - to suit your needs and heating requirements. Of course, we will be happy to take care of the correct design for you.

 

 

Model Performance
in Watt
Assembly position Dimension
in mm
Compatible
light frame
For room size* in m²
with the following insulation
Very good Good Moderate Poor
comfort350 175 horizontal/ vertical 306 x 606 easyLight classic
easyLight deluxe
7 4 2 1
comfort651 325 horizontal/ vertical 306 x 976 - 13 7 4 3
comfort700 350 horizontal/ vertical 606 x 606 easyLight classic
easyLight deluxe
14 7 4 3
comfort701 350 horizontal/vertical 250 x 1206 easyLight classic
easyLight deluxe
14 7 4 3
comfort1030 515 horizontal/vertical 746 x 606 easyLight classic
easyLight deluxe
21 10 6 4
comfort1031 515 horizontal/vertical 376 x 1206 easyLight classic
easyLight deluxe
21 10 6 4
comfort1350 675 horizontal/vertikal 976 x 606 easyLight classic
easyLight deluxe
27 14 8 6
comfort2000 1025 horizontal/vertical 1206 x 746 easyLight classic
easyLight deluxe
41** 21 12 9
comfortSoft500 250 horizontal/vertical 606 x 606 easyLight classic
easyLight deluxe
10 5 3 2
comfortSoft1000 500 horizontal/vertical 976 x 606 easyLight classic
easyLight deluxe
20 10 6 4
comfortSoft1500 750 horizontal/vertical 1206 x 746 easyLight classic
easyLight deluxe
30 15 9 6
comfortPlus900 450 horizontal/vertical 606 x 606 - 18 9 5 4
comfortPlus1800 900 horizontal/vertical 976 x 606 - 36** 18 11 8
comfortPlus2700 1350 horizontal/vertical 1206 x 746 - 54** 27 16 11
*The recommended room size is given for very good | good | moderate | poor insulation. No guarantee. These are Austrian averages and rough guide values.
**Not recommended. Above 30m², at least two panels are recommended for optimal heat distribution.


Technical data

Ceiling mounting
Wall mounting
Voltage 230 Volt
Protection class IP46
Surfaces Front: special ceramic
Back: 3D bright annealed stainless steel
Surface temperature Infrarotheizung comfort max. 95 °C
Infrarotheizung comfortSoft max. 85 °C
Infrarotheizung comfortPlus max. 115 °C
CE-Declaration 2014/35/EU
2014/30/EU
2011/65/EU
(EU) 2015/1188
(EG) 1275/2008

EN 60335-1:2020
EN 60335-2-30:2021-05
EN 62233:2008
TÜV type test Electrical safety, personal safety, electromagnetic compatibility
IEC 60675-3
Elektrosmogfreiheit

Wall mounting of the infrared heating comfort

In this video you can see how an infrared heater comfort is mounted on the wall step by step. The necessary parts are included in the scope of delivery, as is a drilling template. This template quickly and easily specifies the drill holes for the panel and the control unit - depending on whether the installation is horizontal or vertical. All you need is a spirit level, a pencil and a drill with the appropriate drill bits. A cordless screwdriver is also recommended, as this will speed up the installation even more. A pair of needle-nose pliers or similar can also prove helpful when hanging the guardrails.


Ceiling mounting of the infrared heating comfort

In this video you can see how an infrared heater comfort is mounted on the ceiling step by step. The necessary parts are included in the scope of delivery, as is a drilling template. This template quickly and easily indicates the drill holes for the panel and the control. All you need is a pencil and a drill with the appropriate drill bits. A cordless screwdriver is also recommended, as this will speed up the installation even more. Important: Please use the appropriate dowels depending on the ceiling construction and ensure that they are firmly seated!


Optional: light frame for infrared heating

Only easyTherm® offers the option of supplementing the infrared heaters with a light frame. The easyLight LED light frames provide pleasant room lighting with efficient light radiation. Indirect ambient lighting is also possible. Of course, both the light colour and the brightness are adjustable.

The light can also be switched on and off via a light switch, so the easyTherm® lighting and heating solution is no longer noticeable when it is switched off.

To the easyLight variants

Interested in high-quality infrared heaters?

We look forward to hearing from you!

Your request to easyTherm

 

Submit a request

By phone

 

+43 3352 38200 600

 Advice from a specialist
Cosy tiled stove warmth
 Many lighting combinations